Meny
-
FCP12AC
The FCP12AC is a low-cost 1-turn potentiometer with rear extended pin terminals.
Extra taps (available up to 1 tap), shaft with front and rear extension (rear shaft with 1mm dia. and 10mm length), with stopper (rotating angle becomes 310º and stopper strength is 0.3N·m [3kgf·cm]), special electrical travel, shaft dia. (ø3.175mm) bushing with inch dimensions, special machining on the shaft.
-
FCP12A
The FCP12A is a servomount type potentiometer with ball bearings and rear extended pin terminals.
Extra taps (available up to 1 tap), shaft with front and rear extension (rear shaft with 1mm dia. and 10mm length), with stopper (rotating angle becomes 310º and stopper strength is 0.3N·m [3kgf·cm]), special electrical travel, shaft dia. (ø3.175mm) bushing with inch dimensions, special machining on the shaft.
-
FCP22E – low cost
Our FCP22E is a patented 22mm potentiometer. Used for decades in industrial and medical applications. There are countless options with this high quality potentiometer. There is also a version with rear terminals, FCP22R.
-
Conductive plastic
-
Low cost
-
Bushing mount
-
ROHS
-
Patented solution
-
-
FCP22R – low cost with rear terminals
Same specification as FCP22E only with rear terminals.
-
FCP22AC
1-turn potentiometer
-
CP22E
The CP22E is a low-cost potentiometer with plastic housing and an internationally patented snapping-in construction and side lug terminals.
Lower resistance values (10Ω, 20Ω), extra taps (available up to 1 tap), shaft with front and rear extension (rear shaft with 6mm dia. and 20mm length), multi-ganged (available up to 10 gangs), with stopper (rotating angle becomes 320º and stopper strength is 0.6N·m [6kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) bushing with inch dimensions, special machining on the shaft.
