The 12HPS is a small multi-turn servomount type potentiometer with an outer diameter of 13mm. Pin terminals and rear lug terminals are also available in addition to standard lug terminals.

The 22HP is our lowest-cost multi-turn potentiometer with an outer diameter of 22mm. This potentiometer has an international patented snapping-in construction.

Features Multi-turn potentiometer 22HP-5

• Wirewound

• Dimensions (mm) DxL: 22×19

• Standard resistance range (ohm): 100Ω -50kΩ

• Independent linearity (±%): 0.3 to 0.2

• Mechanical travel (+10° 0°): 1,800

• Electrical travel (±5°): 1,800

Special Specifications Available

Shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), multi-ganged (available up to 10 gangs), with high torque, special shaft dia. (ø3mm, ø3.175mm, ø4mm, ø5mm), special machining on the shaft, with plastic shaft, metal bushing type (22HPM-n with anti-rotation pin), 1, 2, 3, 4, 6, 7 and 8-turn versions are available (these versions have the same outer dimensions, but general specifications are please request us for details), simple sealed housing, slippingclutch incorporated type (20mN·m~60mN·m), extra taps (available up to 1 tap only for 10-turn model), servomount type (same dimensions as 22HHPS-10).

The 22HHPS is a low-cost, high resolution and long life servomount potentiometer with an outer diameter of 22mm.

Bushingmount type:

• 5-turn models: 22HHP-5, 22HHP-5M, 22HHP-5E, 22HHP-5N

• 10-turn models: 22HHP-10, 22HHP-10M, 22HHP-10E, 22HHP-10N

Servomount type:

• 5-turn models: 22HHPS-5

• 10-turn models: 22HHPS-10

Shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), 3-turn type, multi-ganged (available up to 10-gangs), with high torque, special shaft dia. (ø3mm, ø3.175mm, ø4mm, ø5mm, ø6.35mm), special machining on the shaft, with plastic shaft, metal bushing type (22HHPM with anti-rotation pin), simple sealed housing, extra taps (available up to 1 tap only for 10turn), slippingclutch incorporated type (20mN·m~60mN·m).