-
HSM14F
6,2mm thin
-
HSM18E/EL
Proven for decades.
-
HSM30/30F
A well proven hall sensor
-
MJ-1L
Lightweight paddle joystick
-
POH120
Decoupled?
-
Bi Metal Temperature Switches
These high-power bimetal operated temperature switches are available either with normally closed (NC) or normally open (NO) contact configuration.
The robust round metal enclosure accommodates a resilient preloading disk, a bimetal disk and a silver contact. The compact switch system is covered by means of a plate which also carries a silver contact and is isolated from the enclosure by means of an isolating washer. The resilient preloading disk ensures excellent performance.
The resilient preloading disk keeps the contact pressure constant throughout the entire temperature range of the BEDIA switch until switching occurs. The mechanically and electrically unloaded bimetal disk snaps over at a preset temperature, with either opening or closing the contact arrangement. The bimetal will only snap back to its initial condition after the temperature has dropped significantly. Compared to other temperature controllers with relatively low hysteresis, the temperature difference between the temperature switch opening and closing is significantly higher so as to a ensure a more obvious status indication, i. e. longer switch-off times, in the event of a fault condition.
-
CL-305-xxx
- Programmable with Do-It-Yourself Composer software
- (8) 10A PWM outputs with current limiting
- (5) switch to ground inputs
- (1) J1939 CAN ports
-
CLS40/45 for Heavy Duty applications
BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors react when a filling level is exceeded or falls below a limit.
Aqueous mediums like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored.
Due to their rugged design, high IP protection classes and a working temperature range from -40 °C to +125 °C (-40 °F to +257 °F) the BEDIA monitoring sensors are primarily used in the following areas:
- Engines
- Agricultural machinery
- Construction equipment
- Hydraulic power-train control systems
- Utility vehicles
-
CLS 50/55 för marina applikationer
BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit.
Water-based liquids like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored.
Due to their rugged design, high IP protection classes and a working temperature range from -40 °C to +125 °C (-40 °F to +257 °F) the BEDIA monitoring sensors are primarily used in the following areas:
- Ships
- Utility Vehicles
- Engines
- Agricultural machinery
- Construction equipment
- Hydraulic power-train control systems
-
MFH58
The MFH58 multi-function handle provides optimal performance and comfort in a robust design that can be used for left-hand or right-hand operation. Available with push buttons, thumbwheels, mini joysticks and a trigger, the MFH58 features a range of individually customizable device plates to fit the needs of your application.
-
CL-607 (2×6)
CL-607 (2×6) CAN Keypad Product Info:
Kompakt 12-knappars förseglad knappsats med CAN-aktivering gör CL-607 idealisk för att konsolidera stora mekaniska strömbrytare och minska komplexiteten i ledningsnätet. CL-607 är robust och förseglad enligt IP67-nivå och kan även monteras utanför hytten. Den erbjuds i J1939 för enkel integrering i befintliga multiplexade system eller CANLink för enkel integrering i ett system som använder andra CANLink-moduler. Integrerad I/O möjliggör fristående tillämpningar eller möjlig eliminering av I/O-modulen för kostnadsbesparingar. CL-607:s förmåga att överleva höga stötar och vibrationer gör den lämplig för fordon på väg och för tillämpningar på off-highway-marknaden.
-
CL-608 (4×3) CAN Keypad
- Programmable with Do-It-Yourself Arranger software
- Sealed construction (IP67)
- Long life: 1million+ key presses
- Large 0.75” x 0.75” buttons
- Capable of detecting multiple simultaneous key presses
- Dimmable LED indicators (via CAN or Analog Input)
- Optional Power LED indicator
- Customizable button labeling / icons
- Customizable LED indicator location & color
- Optional 2nd Connector with I/O or for daisy-chaining keypads
-
CL-610 (2×4) CAN Keypad
- Programmable with Do-It-Yourself Arranger software
- Sealed construction (IP67)
- Long life: 1million+ key presses
- Large 0.75” x 0.75” buttons
- Capable of detecting multiple simultaneous key presses
- Dimmable LED indicators (via CAN or Analog Input)
- Optional Power LED indicator
- Customizable button labeling / icons
- Customizable LED indicator location & color
- Optional 2nd Connector with I/O or for daisy-chaining keypads
-
CL-614 (2×4) CAN Keypad
- J1939 and CANopen protocols available
- Sealed construction (IP67)
- Long life: 2million+ key presses
- Large round buttons
- Capable of detecting multiple simultaneous key presses
- Dimmable LED indicators
- Customizable button labeling / icons
- Customizable LED indicator location & color
- Integrated I/O (1 Input, 1 Output)
-
CL-630 (Jog dial)
Multi-function jog dial features 5 hot keys for fast navigation, a rotary encoder for easy menu scrolling, push-button selection and joystick navigation.
Encoder – rotary scrolling, joystick and push button capable
CAN Port – J1939
Long life – 500,000 cyclesRugged and sealed to IP67
The CL-630’s ability to survive high shock and vibration make it idea for over the road vehicles as well as off-highway market applications.
Meny
Meny
